TinyML on ESP32 with Edge Impulse: Your First On-Device Model
Train a gesture recognition model with Edge Impulse and run it on an ESP32 with an MPU6050. Data collection, training, int8 deployment and testing.
Train a gesture recognition model with Edge Impulse and run it on an ESP32 with an MPU6050. Data collection, training, int8 deployment and testing.
Upload code to the ESP32-CAM with a USB-serial adapter, fix brownout and Connecting errors, use the GPIO4 flash LED, and take a PIR motion photo.
Build a learning prototype that detects tilt with an MPU6050 on an ESP32 and sends alerts over LoRa to a gateway. Wiring, code, testing and limits.
Build a rooftop water tank level monitor with ESP32 and a JSN-SR04T or HC-SR04: level % formula, median filter, phone page, night leak alert and mois…
Publish DHT11 readings from an ESP32 over MQTT to your own Mosquitto broker, then build a Node-RED gauge and chart. Topics, wildcards and security ex…
Use ESP32 deep sleep with timer and button wake-up, keep data with RTC_DATA_ATTR, measure sleep current with a multimeter and estimate real battery l…
Which ESP32 GPIO pins are safe to use? Flash pins, strapping pins, input-only pins, 3.3 V logic and why ADC2 analog reads fail when Wi-Fi is on.
Send DHT11 temperature and humidity from an ESP32 to a Blynk dashboard on your phone. Wiring, 3.3V notes, template setup, code and fixes.
Turn an LED on and off from your phone's browser with an ESP32 web server. Wiring, 3.3V notes, commented Arduino IDE code and fixes.
Build an automatic plant watering system with a soil moisture sensor, relay and mini pump on Arduino Uno. Wiring, calibration, code and fixes.
Build a temperature and humidity display with a DHT11, Arduino Uno and 16x2 I2C LCD. Wiring table, commented code and troubleshooting.