12 Arduino Science Exhibition Project Ideas for School and +2
12 Arduino science exhibition project ideas for school and +2 students, with parts, working principle, difficulty and tips to impress the judges.
On this page
Save this list before the science fair announcement arrives. A winning exhibition project is not the one with the most wires. It is the one with a clear problem, a model that works every time, and a student who can explain it simply. Judges visit dozens of tables, so you have about a minute to make them stop.
These 12 ideas use the Arduino Uno and cheap, common parts. Each includes a working principle, a difficulty level and a "wow factor" to make your table memorable. Ask a teacher or senior to help with wiring, and always check your school's exhibition rules for theme, size and power limits.
Before you start
Basic safety rules
- Use USB power or a suitable battery on the board’s rated input. A 9 V battery goes to the Uno’s barrel jack or VIN, never its 5 V pin. Do not use mains voltage in exhibition models.
- Never connect a motor or pump directly to an Arduino pin. Use a driver or transistor.
- Keep wires neat and the board inside a box so nobody touches loose parts.
- Keep water away from electronics. Use a tray under any water project.
- If you are unsure, ask a teacher before connecting a battery.
How to explain your model in one minute
- Problem: what is wrong in the real world?
- Idea: what does your model do about it?
- Working: sensor, brain (Arduino), action.
- Benefit: who is helped and how?
The 12 ideas
1. Smart dustbin that opens by itself
Parts: Arduino Uno, HC-SR04 ultrasonic sensor, servo motor. Principle: the sensor measures distance; when a hand is closer than about 20 cm, the servo lifts the lid. Level: Easy. Wow factor: add an LED that turns red when the bin is full. Link it to the idea of cleaner streets in your town.
2. Automatic street light
Parts: LDR, 10 kΩ resistor, LED strip or several LEDs with resistors. Principle: an LDR changes resistance with light; the Arduino reads it and switches lights on at dusk. Level: Easy. Wow factor: cover the LDR to "turn the sun off" for judges, and a note on saving electricity in a country that faces load-shedding.
3. Rain alarm and clothes saver
Parts: rain sensor module, buzzer, servo. Principle: water on the sensor plate changes its reading; the servo pulls a clothes-line cover. Level: Easy. Wow factor: use a dropper for a quick monsoon demo.
4. Plant watering system
Parts: capacitive soil moisture sensor, small 5 V pump, relay or transistor, tubing. Principle: dry soil triggers the pump until moisture returns. Level: Medium. Wow factor: a side-by-side demo with two pots, one watered by the system and one forgotten. Great for an agriculture theme.
5. Earthquake alarm model
Parts: MPU6050 accelerometer, buzzer, LEDs. Principle: the sensor detects shaking above a set limit; the buzzer sounds. Level: Medium. Wow factor: build a small shake table from cardboard and let judges shake it. Mention Nepal's earthquake risk, and say clearly it is a model, not a real warning system.
6. Gas leak detector
Parts: MQ-2 gas sensor, buzzer, LED. Principle: the sensor's resistance changes when smoke or LPG is present. Level: Easy. Wow factor: use a test button to simulate a threshold crossing without releasing gas or making smoke. This is a learning prototype only. Use a certified gas detector for protection.
7. Ultrasonic walking stick for the blind
Parts: HC-SR04, vibration motor or buzzer, Arduino Nano, 9 V battery. Principle: distance to an obstacle controls beep speed. Level: Medium. Wow factor: move a cardboard obstacle toward the sensor on a table to show the feedback. Keep this as a tabletop model.
8. Fire alarm with automatic water pump model
Parts: flame sensor, buzzer, tiny pump with transistor. Principle: the flame sensor detects infrared light from a flame; the buzzer sounds and the pump sprays water. Level: Medium. Wow factor: a miniature house. Use a test button to simulate detection without a flame. This is a learning prototype only. Use certified equipment for fire protection.
9. Digital thermometer with fan
Parts: DS18B20 or DHT11, 16x2 LCD with I2C backpack, small fan and transistor. Principle: temperature is shown on the LCD and the fan starts at a set limit. Level: Easy. Wow factor: a warm cup of water to trigger the fan live.
10. Mini solar tracker
Parts: two LDRs, a small solar cell, a servo. Principle: the servo turns the panel towards the brighter LDR. Level: Medium. Wow factor: show a voltmeter reading as you move a lamp around, and link it to Nepal's solar potential.
11. Password door lock
Parts: 4x4 keypad, servo, LCD, buzzer. Principle: the Arduino compares the typed code with a stored one. Level: Medium. Wow factor: three wrong tries sound an alarm. A model only, not for a real lock.
12. Reaction-time game
Parts: push buttons, LEDs, buzzer, LCD. Principle: a random delay, then an LED lights; the Arduino measures how fast you press. Level: Easy. Wow factor: judges and visitors play it, and a high-score table makes your stall busy.
Quick comparison
Scroll sideways to see all columns.
| # | Project | Level | Theme fit |
|---|---|---|---|
| 1 | Smart dustbin | Easy | Cleanliness |
| 2 | Street light | Easy | Energy saving |
| 4 | Plant watering | Medium | Agriculture |
| 5 | Earthquake alarm | Medium | Disaster safety |
| 7 | Blind stick | Medium | Social help |
| 10 | Solar tracker | Medium | Renewable energy |
| 12 | Reaction game | Easy | Fun and interaction |
Tips to impress the judges
- Explain, do not read. Practise saying the story in your own words.
- Make a clean chart: a block diagram (sensor, Arduino, output) beside the model.
- Show the real-world link. "In our village, water tanks overflow" beats "this is a water sensor".
- Do a live demo that takes under 30 seconds and works every time.
- Bring spares: extra USB cable, batteries, jumper wires and a backup copy of the code.
- Be honest about limits. If your model is a prototype, say so.
- Decorate neatly. A tidy model with labels looks more professional than a tangle of wires.
A simple build plan
Scroll sideways to see all columns.
| Week | Task |
|---|---|
| 1 | Choose the idea, learn the parts, write the parts list |
| 2 | Test each sensor alone with example code |
| 3 | Connect everything and write the final code |
| 4 | Build the model body, label it, make the chart |
| 5 | Practise the demo and questions, then relax |
Questions judges may ask
- What happens if the sensor fails?
- Why did you use an Arduino instead of only a switch?
- How would this work in a real house, school or farm?
- What does the resistor do?
- How can you make it cheaper or better?
FAQ
Do I need to know coding to do these projects?
A little helps, but beginners can start from example code in the Arduino IDE and change values. Learn what each line does so you can answer questions.
Which is the easiest project to start with?
The street light, smart dustbin or reaction-time game. They use one or two sensors and give a clear result.
Can I use Arduino Nano instead of Uno?
Yes. The classic 5 V Nano is smaller and works with the same code and sensors, but it needs a breadboard or a shield to connect parts.
How can I win a science exhibition?
There is no formula, but a clear problem, a reliable model, your own explanation and a local link usually stand out. Follow the rules of your school's exhibition.